Smart Temperature Sensor
Product Overview
A Smart Temperature Sensor is an advanced digital temperature measurement device that combines a temperature sensing element with onboard signal processing and communication. It provides accurate, real-time temperature data and supports integration with industrial automation systems, IoT platforms, and monitoring networks. Smart temperature sensors offer enhanced accuracy, self-diagnostics, and digital outputs compared to conventional temperature sensors.
Our Innovations
Industry Focused Products!
How it works (simple explanation)
The sensor detects temperature using an internal sensing element (RTD, thermistor, or semiconductor). The measured signal is processed by an embedded microcontroller, which compensates for errors, filters noise and converts the reading into a digital signal. The temperature data is then transmitted via analogue or digital communication protocols to a controller, PLC, or monitoring system.
What it measures
- Ambient temperature
- Process temperature (liquids, gases, solids)
- Surface or equipment temperature (depending on probe type)
Key advantages
- High accuracy and stability
- Digital signal processing with temperature compensation
- Fast response time
- Supports analog and digital communication protocols
- Easy integration with PLC, SCADA, and IoT systems
- Built-in diagnostics and fault detection
- Reduced wiring and calibration effort
Applications
- Industrial process monitoring
- HVAC and building automation
- Food and beverage processing
- Pharmaceutical and biotechnology industries
- Energy and power plants
- Data centers and electronics cooling
- Smart factories and IoT applications
Installation
- Mount directly into the process using threaded, flange, or immersion probes
- Install in areas with good thermal contact for accurate measurement
- Connect to power supply and control system according to wiring diagram
- Configure sensor parameters via software or communication interface
- Perform functional verification after installation
Technical Specifications
Parameter | Specification |
Sensor Type | RTD (Pt100 / Pt1000), Thermistor, Semiconductor |
Temperature Range | -50°C to +200°C (model dependent) |
Accuracy | ±0.1°C to ±0.5°C |
Output Signal | 4–20 mA, 0–10 V, Modbus, HART, IO-Link |
Response Time | < 2 seconds |
Supply Voltage | 12–30 V DC |
Operating Pressure | Up to 40 bar (probe dependent) |
Housing Material | Stainless Steel / Industrial Plastic |
Protection Class | IP65 / IP67 |
Electrical Connection | M12 Connector / Cable Gland |
Operating Temperature (Elect.) | -20°C to +70°C |